Achronix Bitporter Manual do Utilizador descarregar pdf (Página 39)

Using the Achronix STAPL Player Querying the Availability of Connected Pods (-q option)

Bitporter User Guide

www.achronix.com PAGE 33

Autodetection Mode

Toseealistofthe podscurrentlyautodetectedbyacx_stapl_player,runthefollowingatthe

command‐line:

acx_stapl_player -q

Thiscommandreturnstothecommand‐lineatableofthecurrentlydetectedpods,usingthe

followingcriteria:

• USB‐connectedBitporterpods:Podsconnectedtothehost arelistedbynameinthe

first column only if they are currently not in use by another instance of

acx_stapl_player.Podsconnectedtothe

hostviaUSBwhicharealreadyinusearenot

listed.PodsconnectedtootherhostsviaUSBarenotlisted,regardlessofusagestate.

• Ethernet‐connectedBitporterpods:AllBitporterpodsconnectedonthesamesubnet

as the host are listed by name in the first column. The second column contains

 the

availability status of each pod found. A listing of ++AVAILABLE++ means the pod

currentlyhasnoowner(andisavailableforimmediateuse).AlistingdisplayinganIP

addressmeansthepodiscurrentlyinusebyahostlocatedatthatIPaddress.

Note: BitporterpodsondifferentEthernetsubnetsfrom

thehostarenotautodetected.To

querytheavailabilitystateofthesepods,thepodsmustbequeriedbynamewiththe‐qand‐p

optionsusedinconjunction.See“QueryingtheAvailabilityofNamedPods”below.

Forexample,iftwopodswithserialnumbers12345and12346areconnectedto

thesa mehost

via USB, and  two additional pods with serial numbers 12347  and 1234 8 are connected via

Ethernet on the same subnet, then when the acx_stapl_player is run in autodetection query

mode:

acx_stapl_player -q

Thecommandreturns:

Achronix STAPL Player (acx_stapl_player)

contains elements of Jam STAPL Player Version 2.5 (20040526)

******************************************

* Attempting to find all reachable pods: *

******************************************

Attempting to autodetect availability of local Bitporter pods (USB pods

and Ethernet pods on this subnet)...

...autodetection found 3 pods.

|==========|======================================|

| Pod | Detected |

| Name | Availability |

|==========|======================================|

| usb12345 | ++AVAILABLE++ |

| net12346 | --in use, owner is 192.168.100.123-- |

| net12347 | ++AVAILABLE++ |

|==========|======================================|

Inthisexample,pod12 345 isconnectedviaUSB,andiscurrentlynotinuse.Pod12346isvisible

via Ethernet, but is already in use by a host at IP address 192.168.100.123. Pod 12347 is also

visibleviaEthernet,currentlyhasnoowner,andisthusavailableforuse.Pod12348

isnotlisted,

which means it must also be connected via USB, but it is in use. (USB probes in use are not

autodetected,andarethusnotlisted.)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 49 50

Comentários a estes Manuais

Sem comentários

Achronix Bitporter Manual do Utilizador Página 39

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Achronix Bitporter