Achronix Bitporter Manual do Utilizador descarregar pdf (Página 44)

Programming a Device Using the Achronix STAPL Player

PAGE 38

www.achronix.com Bitporter User Guide

Configuring the Pod to Use a Static IP Address (-is Option)

Reconfiguring the pod to use a static IP requires contacting the network administrator to

determinetherequiredinformation:

•ThepodʹsnewstaticIPaddress,example:192.168.1.123

•Thenetworkmask,example:255.255.255.0

•ThegatewayIPaddress,example:192.168.1.1

Note: ChangingtheEthernetIPconfigurationofapodrequiresaUSBconnection.Itisnot

possibleto

changetheIPconfigurationofapodthatiscurrentlyconnectedviaEthernet.

TochangethepodtouseastaticIPaddress:

1. Eitherdisconnectthepodfromthetargetorpower‐downthetarget.Thepodmust

alwaysbepoweredwhentheconnectedtargetispowered.

2. DisconnecttheEthernet

cablefromthepod.

3. Disconnectthepowercablefromthepod.

4. ConnecttheUSBcabletothePCandthepod.

5. (Optional)VerifythatthestaplplayercanseethepodovertheUSBconnection:

acx_stapl_player -q

6. Onthehost,runacx_stapl_playerwiththe-is,<pod IP>,<network

mask>,<gateway IP>option.

Forexample,toconfigure

apodwithserialnumber12345to usethestaticIP192.168.1.123,enter :

acx_stapl_player.exe -is,192.168.1.123,255.255.255.0,192.168.1.1 -pusb12345

Thiscommandreturns:

Achronix STAPL Player (acx_stapl_player)

contains elements of Jam STAPL Player Version 2.5 (20040526)

********************************************

* Checking current Ethernet configuration: *

********************************************

Attempting to connect to user-specified pod(s):

Successfully opened Bitporter pod usb12345.

Setting new network configuration...

Success!

Updated Bitporter IP Configuration:

DHCP = off

ip = 192.168.1.123

mask = 255.255.255.0

gateway = 192.168.1.1

Programming a Device

Once the user has generated a bitstream for the design, the following steps are used to

programthedevicefromthecommandprompt(alternately,tousetheACEGUI’sDownload

view,see“PlayingaSTAPLFile”inACEUserGuide(UG001)):

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50

Comentários a estes Manuais

Sem comentários

Achronix Bitporter Manual do Utilizador Página 44

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Achronix Bitporter