Achronix Bitporter Manual do Utilizador descarregar pdf (Página 40)

Querying the Availability of Connected Pods (-q option) Using the Achronix STAPL Player

PAGE 34

www.achronix.com Bitporter User Guide

With thisinformation, theuser would subsequently connectto either usb12345 or net12347,

viathe-pcommand‐lineoption.

Querying the Availability of Named Pods

Therearetwotypicalcaseswherea userwoulddesiretoquery thestateofspecificpodsby

name:

1. Theuserwishestoquerytheavailabilityofanon‐localpod (aBitporterconnectedtoa

differentEthernetsubnetthanthehostrunningtheSTAPLPlayer).

2. Therearemultiplepodsvisiblefrom

thehost,buttheuseronlywishestoqueryasub‐

setofthesepodsforperformancereasons.

Unlikeotherpodinteractionmodes(‐aand‐i),pod statusquerieswillcheckthestatus ofall

namedpods,andwillnotstopatthefirstsuccessfulconnection.

UnlikeAutodetectionmode,whenpods

arespecificallynamedwith‐p,theavailabilitystatus

tablewillincludeastatusentryforunavailableUSBpodsandnon‐localEthernetpods.Itwill

alsoincludeanerrorstatusforanypodnameswhichcouldnotbefound.

SimilartoAutodetectionmode,theavailabilityresultsarereturnedintabularform,with

the

first column containing  the pod name, and the second column containing availability

information.Iftherewereerrorsdetectingtheavailabilityofapod,theerrorinformationwill

beincludedinthesecondcolumn.

Theavailabilityresultstablewillbesortedfirstbyavailability,thenbytheorderofthenames

givenby

theuser.Availablepodswillalwaysbelistedbeforeunavailablepods,whichwillin

turnbelistedbeforepodswhichcouldnotbefound.

Thefollowingpodstates canbeexpected:

USB pod names:

NamedUSBpodswillbeshowninoneoftwostates.

•Ifthepodissuccessfullyfound,thismeansitisavailable,anditsdetectedavailability

willbeshownas++AVAILABLE++.

•Otherwise, when the pod is not found, this means it is either not connected to the

host,oritis

inusebyanotherinstanceofacx_stapl_player. Inthiscase,thepodstatus

willbeshownas--in use or not connected--.

Ethernet pod names:

ThereareseveralpossiblestatesthatmaybeshownfornamedEthernetpods.

•If the pod is successfully detected and is available, the status shown will be

++AVAILABLE++.

•Ifthepodissuccessfullydetectedbutisnotavailable(itisalreadyinuse),thelisted

statuswillbe--in use, owner is <ip_address>--.TheIP

addressreported

willbetheaddressofthehostthatiscurrentlyutilizingthenamedBitporter.

•Ifthepodnamecontainsaserialnumber,andthepodisnotdetected,thestatuswill

be --No available Achronix Bitporter products with matching

serial number found on local subnet.--(Rememberthatpodnameswith

serialnumbersonlyreachthelocalEthernetsubnet;podsonadifferentsubnet

from

thehostmustbenamedusingtheirIPaddress.)

•IfthepodnamecontainedanIPaddress,andnothingwasfoundatthataddress,the

status will be --No available Achronix Bitporter product found at

supplied network address.--.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 49 50

Comentários a estes Manuais

Sem comentários

Achronix Bitporter Manual do Utilizador Página 40

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Achronix Bitporter