
VRX-SENS
Receiver Input Voltage Sensitivity Under the
Following Conditions:
• 50inch of FR4
• 6.25Gbps
• PRBS7 data pattern
40 50
mV
diff-
pkpk
TRX-DDJ
Receive Input Signal Data Dependant Jitter
(Inter-Symbol Interference).
1 UIpkpk
TRX-TJ
Receive Input Signal Total Jitter (Inter-Symbol
Interference).
1 UIpkpk
NGPLL
F3dB cutoff frequency for the 1
st
Pass Jitter Measurement Filter.
Defined as the ratio of the F3DB cutoff
frequency, to the data rate
1667
F
BAUD/
F
GPLL
Eye Diagram
This section describes the RX eye diagram specifications of the SerDes. The specifications
include required input voltage swing and receiver jitter tolerance requirements. The eye
template used is shown in “Figure 46: Receiver (RX) Eye Diagram Specification”.
Figure 46: Receiver (RX) Eye Diagram Specification
Table 27: Receiver (RX) Eye Diagram Specification
Standard X1 (UI) X2 (UI)
p-min
p-max
110 UG028, July 1, 2014
Comentários a estes Manuais